Subaru & Toyota 6-Pin Accelerator Pedal (APP) & Wastegate Connector Kit

Is your throttle feeling unresponsive or is your Hilux struggling with boost control? This TS 025 Sealed Series 6-pin connector is the factory standard for Drive-By-Wire (DBW) Accelerator Pedal Position Sensors and specific Turbo Wastegate Actuators.

Because this plug is located either in the footwell (on the pedal) or near the high-heat environment of the turbocharger, the plastic clips are prone to becoming brittle and snapping. A loose connection here is more than just an inconvenience—it’s a safety risk. This kit allows you to completely refresh the connection, ensuring the ECU receives a stable, uninterrupted signal from your right foot or your wastegate actuator.

Compatibility & Fitment

This 6-pin weatherproof connector is a direct OEM-spec replacement for:

• Subaru: Drive-By-Wire (DBW) Accelerator Pedal Position (APP) Sensors (2008+ Models).

• Toyota: DBW Accelerator Pedal Position (APP) Sensors.

• Toyota Hilux & Hiace: Turbo Wastegate Actuator interface.

• OEM P/N: 6189-1083 / 12303WQA06F-B.

• Toyota Cross-Reference: 90980-12303.

• Nissan Cross-Reference: J-48817-1154.

What’s in the Box?

• 1x Connector Body (6-Pin)

• 6x High-Conductivity Terminals

• 6x Weather-Tight Cable Seals

Installation

• Crimp Tool: For sensitive throttle and boost control signals, a perfect crimp is non-negotiable to prevent signal "noise." We recommend using the Sargent 1026CT crimp tool for a professional, gas-tight finish.