Subaru STI Brembo Rear Brake Pad Fitting Kit

To complete your braking system restoration, the Brembo 2-Pot rear caliper requires the same level of hardware precision as the front. Because the rear brakes are often subject to more road grime and less frequent servicing, the pins and springs are prone to seizing and loss of tension, which can cause uneven pad wear and an unrefined "clacking" sound during engagement.

The Roo Racing Rear Brembo Hardware Restoration Kit is the final piece in ensuring your STI or Forester STI performs with the mechanical silence and bite of a brand-new vehicle.

Subaru STI Brembo Rear Brake Pad Fitting Kit

Precision Rear Hardware for GD, GV, and VA Series STI.

While the front brakes do the heavy lifting, the rear Brembo 2-Pots are critical for vehicle stability and "brake dive" control. Reusing corroded pins or heat-fatigued springs in the rear often leads to pad binding, which increases rotor temperature and can prematurely wear out your rear pads.

Our Quality Aftermarket Fitting Kit is specifically sized for the rear 2-Pot Brembo architecture. It provides the exact tension required to keep the pads seated against the pistons, ensuring a crisp, consistent pedal feel every time you transition from throttle to brake.

Why This Rear Kit is Essential:

• Eliminate Rear Brake Drag: Fresh Retaining Pins provide a mirror-smooth sliding surface. This is vital for the rear, where debris buildup often causes pads to "hang," leading to unnecessary friction and heat.

• Quiet, Positive Engagement: The Rear Cross Springs are calibrated to maintain the perfect balance of pressure—enough to stop pad rattle, but light enough to allow instant retraction when the pedal is released.

• Fail-Safe Security: We include four R-Clip Retaining Pins to mechanically lock the main pins in place. This redundant safety feature is a must for any Subaru seeing track time or spirited mountain drives.

• Corrosion Protection: Each component features a high-durability finish designed to withstand the harsh environment of the rear wheel arch, preventing the galvanic bonding that makes future pad swaps difficult.

The Hardware Manifest:

• (2) Rear Pad Tension Cross Springs: High-memory spring steel.

• (4) Rear Pad Retaining Pins: Polished shafts for smooth engagement.

• (4) Pad Pin R-Clips: Heavy-duty locking clips for total security.

Fitment & Compatibility

Fits Subaru models equipped with factory 2-Pot Rear Brembo Calipers:

• Subaru Impreza WRX STI | GD, GR, GV (2002–2014)

• Subaru WRX STI | VAF (2015–2017 with 2-Pot Rears)

• Subaru Forester STI | SG9 (2004–2008)

🛡️ The Roo Racing Service Tip

The rear Brembo pins are smaller than the fronts and can be more delicate. When installing, ensure the cross spring is centered perfectly before sliding the second pin through. Applying a small amount of silicone-based brake lubricant to the pins will ensure they remain free-floating and easy to remove during your next service interval.

Subaru WRX STI Rear Brake Hardware Kit