Mitsubishi 4G63 EVO 9 Cam Sensor Relocation Kit - Intake

Following our success with the Exhaust cam sensor relocation we went ahead and started production on the intake cam sensor relocation kit for the EVO 9 as our followers requested.

This will prevent wire entanglement if using our exhaust cam sensor relocation and turn the intake cam sensor by 90 degress for easier installation. 

The housing was CAD designed on a 3D Scanned Evo 4G63 head and fits perfectly. It is made out of 6061 Aluminium with T6 heat treatment for the ultimate strength.

It comes with two o-rings on the front and the back. No more silicon and gaskets that break easily. The o-rings are perfectly matched and will last much longer then the OEM gasket and RTV silicon used to seal the housing against the head cylinder.

This kit does come with installation manual - you will need to turn the trigger plate that is bolted to the cam accordingly.

What's in the Box ?

* Cam Sensor Relocation Housing

* 2x O-rings to fit in the housing - Front + Back

* 3x bolts to close the Cap on the housing

* 1x M6 bolt to mount the cam sensor
* 2x M8 bolt to mount the housing onto the cylinder head